3D tour · V21 Artspace
Galeón Andalucía
A tour in section
An independent 3D reconstruction of the replica 17th-century Spanish galleon, seen from the quay, from above and from within. At St Katharine Docks, London, from 13 November 2026 to 10 January 2027.
Scroll to explore
From the quay to the hold.
Start the tour Opens full screen. Scroll, swipe or use the arrow keys to move from chapter to chapter; the chapter list jumps straight to any part of the ship.
The ship
A galleon of the Indies fleets.
The Galeón Andalucía is a full-size replica of a 17th-century Spanish galleon. Designed by Ignacio Fernández Vial and built for the Fundación Nao Victoria, she was launched at Punta Umbría in 2009 and has since toured as a museum ship on four continents.
She arrived at St Katharine Docks at the end of a 2026 tour of the UK and Ireland. The tour follows her from the water, round the bow, hull, rig and stern, then opens the hull in section and goes inside: the Admiral’s room, the gun deck and the hold.
- Length overall
- 49.4 m
- Beam
- 10.1 m
- Main mast, keel to truck
- 37 m
- Launched at Punta Umbría
- 2009
10 chapters
Inside the tour

01
Arrival
A full-size replica of a 17th-century galleon of the Indies fleets, moored in the dock.

02
Bow
A long, low beakhead without a figurehead, and a steeply rising bowsprit.

03
Hull
Riders, wales and eight lidded gunports a side.

04
Rig
Seven sails on three masts, furled beneath the yards.

05
Stern
The tall transom, its balcony and the painting of the Virgin.

06
Deck
The decks climbing from the waist to the quarterdeck and poop.

07
In section
One side taken away: the ship as a stack of decks.

08
Admiral’s room
One panelled room across the stern, lit by leaded windows.

09
Gun deck
Iron guns at the open ports, the capstan on the centreline.

10
Hold
Casks and sacks below the waterline, in near darkness.
How it was made
From photographs to a ship you can walk through.
The tour was researched, modelled, rendered and built in-house by the V21 Artspace studio, the same team that makes our 3D virtual exhibitions for museums, galleries and heritage organisations.
01
Research
We began by gathering photographs of the ship from every side and working through the builder’s published figures, so that every length, beam and spar in the model checks against the real vessel.
02
Modelling
Our studio built the ship in Blender deck by deck: hull planking, riders and wales, the full rig with its furled sails, then the interiors, so that the hull can be opened in section and entered from the stern down to the hold.
03
Lighting and render
We lit the ship as she lies in the dock in winter daylight, then rendered one continuous camera journey as 450 frames, twice over: once composed for landscape screens and once for phones held upright.
04
The tour
We built the tour as a lightweight web app that plays the frames as you scroll, gliding from one chapter to the next, with captions, a chapter list and keyboard control. It runs in any modern browser with nothing to install.
An independent 3D reconstruction made from photographs and published sources. It is not affiliated with the ship’s operator. Interiors are an interpretation of a working 17th-century ship, not a record of the vessel as she is fitted today.